Insert bearing with set screws locking and narrow inner ring
Insert bearings are based on sealed deep groove ball bearings. This variant of insert bearing is suitable for applications with both constant and alternating directions of rotation. It has an inner ring extended on one side, and is locked onto the shaft by tightening two (set) screws on the inner ring.
- Quick and easy to mount onto the shaft
- Long service life
- Reduce noise and vibration levels
Dimensions
| Bore diameter |
25.4 mm
|
| Outside diameter |
52 mm
|
| Width, total |
27.2 mm
|
| Width, inner ring |
27.2 mm
|
| Width, outer ring |
15 mm
|
Properties
| Retaining feature, inner ring |
Set screws |
| Bore type |
Cylindrical |
| Rolling elements |
Balls |
| Outer ring type |
Cylindrical |
| Inner ring extension |
On one side |
| Cage |
Non-metallic |
| Rubber seating ring |
Without |
| Material, bearing |
Bearing steel |
| Coating |
Without |
| Sealing |
Seal on both sides |
| Sealing type |
Contact, standard |
| Lubricant |
Grease |
| Relubrication feature |
Without |
Performance
| Basic dynamic load rating |
14 kN
|
| Basic static load rating |
7.8 kN
|
| Limiting speed |
7 000 r/min
|
| Note |
Limiting speed with shaft tolerance h6 |
